EasyManua.ls Logo

LUMINANCE RED - Maintenance; Technical Specifications

LUMINANCE RED
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning Recommendations
After using the device, rinse the fiber optic tip
carefully under running water for a few seconds
with the device powered o.
Then, use a 70% isopropyl alcohol and water
solution applied with a cloth or alcohol prep pad
to clean the fiber optic tip.
You can also dip the head into a solution of 70%
isopropyl alcohol and water for 60 seconds.
Let the device air dry or hand dry it with a cloth or
towel.
Do not put the device in the dishwasher or
submerge it underwater.
Environmental Notice
This product contains a rechargeable battery. In
the interest of protecting the environment, please
do not dispose of the product in the household
waste at the end of its useful life. Disposal can take
place at an appropriate collection point provided
in your country.
Maintenance
Device Information
Product dimensions: 27 cm x 3 cm x 3 cm
(10.5 in x 1.2 in x 1.2 in)
Product weight: 295 grams (0.65 pounds)
Adapter information: AC100-240V 50/60Hz
Optical Parameters
Wavelength: 415nm and 660nm
Optical power: 50 mW/cm
2
Battery Information
Type: Lithium ion, dc
Capacity: 2,200 mAh
Voltage: 3.7 V
Transportation and Storage
Environmental temperature range: -20
degrees to +55 degrees Celsius
Relative humidity range: < 93%
Atmospheric pressure range: 50 kPa to
106kPa
Technical Specifications
6