LUMINELL DL Series - User Manual

DJI M210 PWM for DL series Manual v.1.1
Page 1 of 6
Luminell AS Myrabakken Næringssenter Bygg 2, NO-6010 Ålesund - Org.nr 915 014 348 - +47 70 10 10 70
www.luminell.com
USER MANUAL
HOW TO USE PWM ON DJI M210 TO
CONTROL DL A
Thank you very much for choosing the DL Series drone lights, and congratulations with your new product. We hope
that you will enjoy it and that it will serve you in whatever you use it for. Please feel free to contact us for any
types of feedback.
GENERAL INFORMATION
The DL Series is created to push limits and maximize the potential in LED
technology and optical performance. DL A is developed with focus on high light
performance, low weight and smart control functions. This manual shows how to
connect the DJI M210 DL Kit and how to control the DL A using DJI M210 Extended
Power Port and PWM signals.

LUMINELL DL Series Specifications

General

Brand	LUMINELL
Model	DL Series
Category	Control Unit
Language	English

Summary

User Manual Overview

General Information

Overview of the DL Series, its capabilities, and the manual's purpose in connecting the DJI M210 DL Kit.

Connecting the DL Kit

Physical Connection Steps

Instructions for accessing power/PWM connectors and physically connecting the DL Kit to the DJI M210.

Extended IO Options Configuration

Accessing Extended IO Options

Steps to navigate the DJI app to access Extended IO Options for controlling the DL A.

Extended IO Switch Control

Activating PWM and Light Control

Using the Extended IO Switch to enable PWM control or toggle lights on/off.

PWM Settings Interface

Configuring Port 1 for PWM

Accessing Port 1 settings to configure GPIO, Duty Ratio, and Frequency.

Adjusting PWM Intensity

Setting Light Intensity Range

Adjusting the Duty Ratio between 56 and 120 to control light intensity.