4) “Hidden” features
New features are added to an ugly page before going “official”. You can access this page from
https://aagsolo/ExtraConf.html
As of current version, 2.4, it allows the user to specify a fully static IP address (not the safe,
semi-static method in the normal configuration page), and to return it to its normal, DHCP-
enabled state. Use with care. A wrong IP address may render the unit network invisible. You
may have to replace the SD card in that case.
This is the current page:
SOLO - Users manual v. 2.5 18/20 19. Jan. 2021
To Next Page
Loading...