2) Accessing the data
Now that the “Solo” is up and running, and connected to your local network, it will fetch an IP
address (automatically, using DHCP, as standard in the vast majority of networks) and start
publishing information in a variety of ways.
There is a separate document explaining the procedure to enable your Solo being accessed from
the internet.
2.1) Main web page
From your web explorer, now you can type: “http://aagsolo” (in the address bar,
not in Google!
),
and you'll see the main “Solo” page:
SOLO - Users manual v. 2.5 4/20 19. Jan. 2021
To Next Page
Loading...
Need help?
General