Luneau Technology Briot Alta Evolution - User Manual

Instructions for cleaning and sterilization
Briot Edger
Alta Evolution / Evolution HC / Attitude I / Attitude II
This instruction guide aims to clean and sterilize your
Alta Evolution, Evolution HC, Attitude I, Attitude II for common use .
For other instructions, please refer to the USER MANUAL of each model.
For your comfort it’s recommended to clean the device regularly. Please clean the instrument following these
instructions. Cleaning conducted by a process other than the one described in this instruction may cause
deterioration or damage to the equipment.
1- Clamping unit and clamping parts
Cleaning of the clamping unit and clamping parts should be done regularly twice a day, or when different persons are working
with the machine - before changing the user. Clean with Cidalkan wipes incl. alcohol. disinfectant or other alternative.
Briot Edger (Alta Evolution / Evolution HC / Attitude I / Attitude II)
df
Briot Blocker (Evolution / Evolution GT / Attitude / Attitude GTS)
The screen must be wiped gently without
applying excessive force.
2- Cleaning of the touchscreen
Clean the screen after every use with Cidalkan wipes or other alternative.

Summary

Briot Edger Cleaning and Sterilization Procedures

Clamping Unit and Parts Cleaning

Regular cleaning of the clamping unit and parts twice daily or when users change.

Touchscreen Cleaning After Use

Clean the screen gently after every use with recommended wipes.

ON;OFF Switch Cleaning

Clean the ON/OFF button after each machine use, ideally after removing gloves.

External Device Body Cleaning

Clean external plastic surfaces gently after unplugging the device.

Toolbox Exterior Cleaning

Regular cleaning of the toolbox exterior, including handles.

Luneau Technology Briot Alta Evolution Specifications

General

Type	Automatic Edger
Beveling	Yes
Dimensions	1, 140mm (W) x 1, 280mm (D) x 1, 550mm (H)
Grooving	Yes
Drilling	Yes
Safety Beveling	Yes
Polishing	Yes