18
Should you have any questions
or concerns, please contact us
at support@lunixinc.com and we
will respond within 24 hours.
Lunix Inc.
www.lunixinc.com
support@lunixinc.com
PCB problem
Contact us at
lunixinc@support.com for
further assistance
Unit not fully charged
Make sure the massager is fully
charged and if the problem
persists contact us at
lunixinc@support.com
Unit not fully charged and the
heat option takes some time to
achieve the highest temperature
Wait at least 10-12min before
feeling the heat and you can
also wear a regular pair of thin
gloves; thus, you can increase
the heat- feeling
PCB defective
Contact us at
lunixinc@support.com for
further assistance
Excessive use
Power off the unit and let it cool
before further use
The display is constantly
turning on and off making a
beeping noise
The vibration function is not
working
Heat function not working
Unit changing intensity
programs
Unit is hot
To Next Page
Loading...
Need help?
General
