Lupine SL User Manual (English)

Jeremy JamesJul 28, 2025

What to do if my Lupine SL light does not turn on?

K
Katrina GeorgeJul 28, 2025
If your Lupine Bicycle Accessories light isn't turning on, there are a few potential reasons. First, the cable ends in the light head might have reverse polarity. To fix this, remove the end cap of the light head and clamp the cable ends according to the marking on the gasket. Also, check that the light cable is properly connected to the drive. Finally, the light input might not be activated in the Bosch software; in that case, you will need to have the light input activated at the Bosch dealer.

Brand	Lupine
Model	SL
Category	Bicycle Accessories
Language	English

Brand

Lupine

Model

Safety Instructions

General Safety Warnings

Provides essential warnings for safe operation, including eye protection and potential product failure.

Heat Generation

Details on the housing heating up and the need for safe distance to flammable materials.

Water Resistance

Information on the IP68 rating but clarifies it's not for underwater use.

Cleaning Instructions

Guidance on proper cleaning methods, advising against high-pressure water or harsh detergents.

Assembly Instructions

Mounting Holder Arms

Instructions for replacing the existing Bosch holder arm with the supplied SL holder arm.

Removing Light End Cap

Procedure to remove the end cap from the rear of the light using four screws.

Preparing Light Cable

Details on cutting the cable to length and removing insulation, without the need for tinning.

Attaching Cable Grommet

Instructions on threading the black cable grommet onto the light cable correctly.

Connecting Cable Strands

Guide to positioning and securing the cable strands in the clamps, observing polarity.

Securing End Cap

Steps to reattach the end cap, ensuring correct positioning of the black cable grommet for a seal.

Final Mounting on Display

Instructions for screwing the SL onto the Bosch display brackets using supplied screws and a T15 Torx.

Operation and Settings

Light Modes

Details on switching between different light modes and the automatic day/night function.

Customizing Light Settings

Guide to adjusting settings like Eco mode, delay, and sensor calibration via the button.

Troubleshooting

Light Not Turning On

Troubleshooting steps for when the light fails to turn on, including polarity and connection checks.

Light Input Activation

Guidance on resolving issues related to the light input not being activated in the Bosch software.

Technical Data

Electrical and Performance Specs

Details on operating voltage, lumen output, power consumption, and beam characteristics.

Physical and Environmental Specs

Information on dimensions, material, protection class (IP68), and waterproof rating.

Lupine SL User Manual

Table of Contents

Questions and Answers:

Lupine SL Specifications

Summary