Need help?Do you have a question about the Lupine Wilma and is the answer not in the manual?
General| Water Resistance | IP68 |
|---|---|
| Battery | Smartcore Battery |
| LEDs | Cree XM-L2 U3 |
| Housing Material | Aluminum |
| Material | Aluminum |
| Modes | 5 (including Eco, Low, Medium, High, Turbo) |
Key safety instructions for using the light, including eye protection and handling.
Information on heat produced by the light and the importance of airflow for performance.
Details on the light's waterproof rating and limitations for underwater use.
Instructions for attaching the light to handlebars or similar objects using the O-ring bracket.
Guide for mounting the light onto helmets with ventilation slits.
How to adjust the lamp housing angle for optimal beam direction.
Mounting the light as a headlight or using the Headbelt HD.
Securing the battery pack to bicycle frames using straps.
Understanding the LED indicators for battery charge status.
Process for starting the light and interpreting initial voltage readings.
How to turn the light on and cycle through different power output levels.
Factors affecting light output and automatic power reduction due to heat.
Procedure for turning the light off by holding the power button.
Activating and deactivating the special SOS signal mode.
Interpreting LED signals for battery discharge and low power.
Activating a limited power mode for extended use when battery is low.
Guide to programming up to four custom brightness levels for various modes.
Information on the RVLR mode and its additional slow flash functionality.
Procedure to reset all customized settings back to the original factory defaults.
Instructions for plugging in and using the Micro Charger for Li-Ion batteries.
Interpreting the LED displays on the charger for charging status.
How to connect and use the Wiesel charger for charging.
Changing the SOS function to RVLR or Alpine Emergency signals.
Using lamp-head LEDs to indicate battery capacity after charging.
Customizing the voltage thresholds for low battery warnings.
Restoring factory default configurations for special functions.
Guidance on cleaning and protecting plug contacts from oxidation.
Important precautions for transporting the light and battery separately.
Recommendations for storing the light and battery during long periods of non-use.
Instructions for safely opening and reassembling the lamp housing.
Solutions for issues where the light fails to power up.
Troubleshooting steps when power LEDs do not illuminate.
Diagnosing why the power LEDs turn off unexpectedly.
Resolving issues where the battery fails to charge correctly.
Specifications for the weight of the lamp and various battery configurations.
Detailed lumen output and runtime for different power levels.
Information on charging duration and battery nominal voltages.
Technical details for the Micro and Wiesel chargers.
Legal disclaimers regarding usage and the product's warranty terms.
The acceptable temperature range for the Wilma light system.
The defined beam angle for the light output.
To Next Page
