121
by Lutron
Removing Paired Pico Remote Controls from a Caséta Wireless Fan Control (PD-FSQN)
1
Tap the "On" button quickly at least three times,
holding on the last press
0
5
10
15
3
sec.
2
Continue to hold the "On" button until the Status LED
begins to flash slowly
UNTIL
3
Release the button, then immediately tap the button
at least three more times and release
4
All paired Pico remote controls are removed and all
settings are returned to factory defaults
– After the switch resets, the fan will turn on to high.
Status LED flashes
slowly
Status LED flashes
quickly
TAP 3x TAP 3x
HOLD
To Next Page
Loading...