Lutron Electronics Caseta PD-5ANS - Page 96

96
by Lutron
Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS)
21
Turn power on at circuit breaker
Pairing the switch and Pico remote controls
23
Press and hold "Off" button on remote control
0
5
10
15
6
sec.
UNTIL
Location 2
Repeat steps 22 and 23 to pair remote control
at Location 3.
24
Repeat for remote control at Location 3
17
Tag and disconnect wires from the existing switch
Different Color Screw
Ground (Green / Bare Copper)
18
Connect the wires
19
Attach the wallplate bracket and Pico remote control
Ground (Green / Bare Copper)
Place tag - to
identify wire on
different color screw
Location 3
Tagged Wire
Location 3
Location 3
20
Attach the wallplate
‘snap’
Wallplate
Adapter
Wallplate
Location 3
HOLD
Lights flash
three times
3x
22
Press and hold "Off" button on switch
0
5
10
15
6
sec.
UNTIL
HOLD
Status LED flashes
Location 1