Lutron Electronics Caseta PD-5ANS - Page 97

97
by Lutron
Multi-Location Installation - Caséta Claro Smart Switch with Pico Remote Controls (DVRF-5NS)
Neutral
Pico
Remote
Control
Line / Hot
Traveler Traveler
Traveler
Traveler
Caséta
Claro
Smart
Switch *
Ground
(Green)
Load
LED
DEL
INC /
HAL
Schematic Diagram
Pico
Remote
Control
Location 1 Location 2 Location 3
Tagged Wire Tagged Wires
Blue
Black
Red
White
* It is recommended to install switch in either Location 1 or 3.
Note: The red wire must be connected to the load and the black wire must be connected to Line/Hot. The product will not work if the wires
are reversed.