Lutron Electronics Caseta PD-5ANS - Page 99

99
by Lutron
Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS)
8
Connect the new Caséta Diva Smart dimmer
Location 1
6
Tag and disconnect wires from the existing switch
Different
Color Screw
Ground
(Green / Bare Copper)
Place tag - to identify wire on
different color screw
Location 1
Tagged Wire
Ground
(Green Wire)
Red
Black
Blue
7
Ganging and derating
Note: Diva Smart models don’t have fins but derating is
still required. See the chart below.
9
Mount the Caséta Diva Smart dimmer
10
Attach the wallplate
Location 1
Location 1
‘snap’
Wallplate
Adapter
Wallplate
Total Dimmable LED Wattage Incandescent/Halogen Total Wattage
0 W + 600 W 500 W 400 W
1 W – 25 W + 500 W 400 W 300 W
26 W – 50 W + 400 W 300 W 200 W
51 W – 75 W + 300 W 200 W 100 W
76 W – 100 W + 200 W 100 W 50 W
101 W – 125 W + 100 W 50 W 0 W
126 W – 150 W + 0 W 0 W 0 W
Important note:
Ganging units together may reduce the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
B
B B
C
B
A
A
B
C
Note wire
color tied to
blue wire