Lutron Electronics Caseta PD-5WS-DV - Page 100

100
by Lutron
14
Mount the Claro Smart accessory switch
15
Attach the wallplate
Multi-Location Installation - Caséta Diva Smart Dimmer with Claro Smart Accessory Switch (DVRF-6L / DVRF-AS)
16
Remove existing switch from wall at Location 3
Location 2
Location 2
13
Connect the Claro Smart accessory switch for Location 2
Location 2
11
Remove existing switch from wall at Location 2
12
Tag and disconnect wires from the existing switch
Ground (Green / Bare Copper)
Location 2
Location 2
Place tags - to identify wires
on different color screws
Different Color Screws
Location 3
‘snap’
Wallplate
Adapter
Wallplate
Tagged Wire
Ground
(Green Wire)
Red
Black
Blue
Match noted wire
color from Step 8
tied to blue wire.