132
by Lutron
Motion Sensor Placement and Coverage (PD-OSENS / PD-VSENS)
Motion Sensor Placement Examples (continued)
4
Foyer
A Caséta Wireless motion sensor is mounted flat on the wall at the height of 6 ft (1.8 m) where it can "see" the whole room. The placement
of the sensor ensures that it won’t see any movement outside of the room, nor can the sensor see movement through the glass window.
The sensor and Pico remote control are paired to a Caséta Wireless dimmer allowing the user to adjust the brightness of the light in the
foyer. The Auto-On setting is set to "Enabled", allowing for the sensor to automatically turn the light On / Off when a person enters / exits the
foyer.
Pico Remote
Control
Flat Wall-Mount
Caséta Wireless
Motion Sensor
Caséta Wireless
Dimmer
Front Door
Entry
Window
Adjacent
Room Entry
3
Kitchen
A Caséta Wireless motion sensor is mounted flat on the wall at the height of 6 ft (1.8 m) where it can "see" the whole room *. The placement
of the sensor ensures that it won’t see any movement outside of the kitchen, nor can the sensor see movement through the glass window.
The sensor is paired to a Caséta Wireless dimmer allowing the user to adjust the brightness of the light. The Auto-On setting is set to
"Enabled", allowing for the sensor to automatically turn the light On / Off when a person enters / exits the kitchen.
Entry
Flat Wall-
Mount Caséta
Wireless
Motion Sensor
Window
Caséta
Wireless
Dimmer
* DO NOT place sensor within 4 ft (1.2
m) of moving air currents (e.g., HVAC
vents), heat source (e.g., light bulbs
or microwave / standard ovens). Heat
from an oven may cause sensor to
see movement. Changing the activity
setting to medium- or high-activity may
be necessary. Refer to the back of the
sensor or visit:
www.casetawireless.com/sensorfeatures
To Next Page
Loading...
