Lutron Electronics MHB-382SD - Barometer Unit Configuration; DC Adapter Power Supply

7-8 Set the unit of Barometer
When the Display show " bAro "
1)Use the " Button " ( 3-3, Fig. 1 ) or " Button " ▲ ▼
( 3-4, Fig. 1 ) to select the upper Display text to
hPA ", " - Hg " or " InHg ".
Text Unit
hPA hPa
- HG mmHg
InHg inHg
2)After the unit is selected, press the " Enter Button " (
3-2, Fig. 1 ) will save the setting function with
default.
8. POWER SUPPLY from DC
ADAPTER
The meter also can supply the power supply from the
DC 9V Power Adapter ( optional ). Insert the plug of
Power Adapter into " DC 9V Power Adapter Input Socket
" ( 3-14, Fig. 1 ).
15