Application Note #734
11 Customer Assistance — 1.844.LUTRON1
Light Bar Brightness Mode (continued)
5. Select the Light Bar Brightness menu by touching LED 5 and
tapping the
Off
button. An LED will be flashing quickly to indicate the
current Light Bar Brightness setting.
6. Touch the light bar in the area of the LED corresponding to
your selection.
7. Tap the
Off
button to confirm and save your settings.
8. Press and hold the
Off
button for approximately 6 seconds to go
back into Normal Operation.
LED 9: Light Level
Indicator / Locator Light
LED 5: Light Bar Brightness
LED 1: Preset Light Level
FASS
TOUCH
On
Off
LED 9: Maximum Brightness
LED 5: Medium Brightness
LED 1: Minimum Brightness
TOUCH
On
Off
TAP
MIN
SEC
PRESS &
HOLD
To Next Page
Loading...
