Lutron Electronics Sunnata ST-PRO-N - Page 13

Application Note #734
13 Customer Assistance — 1.844.LUTRON1
®
Light Level Indicator / Locator Light Mode (continued)
5. Select the Light Level Indicator / Locator Light feature by touching
LED 9 and tapping the
Off
button. An LED will begin flashing quickly
to indicate the current Light Level Indicator setting.
6. Touch the light bar in the area of the LED corresponding to
your selection.
7. Tap the
Off
button to confirm and save your settings.
8. Press and hold the
Off
button for approximately 6 seconds go back
into Normal Operation.
LED 9: Light Level
Indicator / Locator Light
LED 5: Light Bar Brightness
LED 1: Preset Light Level
FASS
TOUCH
On
Off
LED 7: Light Level Indicator ON,
Locator Light ON
LED 5: Light Level Indicator ON,
Locator Light OFF
LED 3: Light Level Indicator OFF,
Locator Light ON
LED 1: Light Level Indicator OFF,
Locator Light OFF
TOUCH
On
Off
TAP
MIN
SEC
PRESS &
HOLD