Lutron Electronics TM-947SD User Manual

5-5 Check sampling time information
During the normal measurement ( not execute the
Datalogger ), If press " Sampling Button " ( 3-8, Fig. 1 )
once , the lower LCD display will present the Sampling
time information in second unit.
5-6 SD Card Data structure
1)When the first time, the SD card is used into the meter,
the SD card will generate a folder :
TMA01
2)If the first time to execute the Datalogger,
under the route TMA01\, will generate a new
file name TMA01001.XLS.
After exist the Datalogger, then execute again,
the data will save to the TMA01001.XLS until
Data column reach to 30,000 columns, then
will generate a new file, for example TMA01002.XLS
3)Under the folder TMA01\, if the total files more
than 99 files, will generate anew route, such as
TMA02\ ........
4)The file's route structure :
TMA01\
TMA01001.XLS
TMA01002.XLS
.....................
TMA01099.XLS
TMA02\
TMA02001.XLS
TMA02002.XLS
.....................
TMA02099.XLS
TMAXX\
.....................
.....................
Remark : XX : Max. value is 10.
13

Lutron Electronics TM-947SD Specifications

General

Brand	Lutron Electronics
Model	TM-947SD
Category	Thermometer
Language	English