Lux Products LUX/GEO User Manual

WiFi THERMOSTAT
Welcome to your LUX/GEO quick-start guide
Your LUX/GEO internet connected thermostat puts the control of your comfort in your hands and you
are only 10 easy steps away from completion.
Step 1: Getting started
Included:
Items needed:
IF AT ANY TIME DURING THE INSTALLATION AND SET-UP PROCESS YOU NEED ADDITIONAL SUPPORT,
VISIT LUXGEO.COM OR CALL 856.234.8803
2-AA Lithium
batteries
2 mounting
screws
2 wall
anchors
wire stripper
& cutter
Phillips & at
head screwdriver
WiFi enabled
mobile device
IF YOU DO NOT HAVE AN iOS OR ANDROID DEVICE, PLEASE VISIT LUXGEO.COM OR CONTACT LUX SUPPORT
GEO
Download App and
Create Your Account
Download your LUX Products App
Depending on device type, search
the App store for “LUX Products” and
create your LUX user account
Lux
Power Bridge
WiFi
router
For Use On:
 Most 24-volt heating and cooling systems
 1 or 2 stage heat / 1 or 2 stage cool: gas, oil, or electric
furnace and a/c systems
 1 or 2 stage heat / 1 stage cool: heat-pump style systems
 2-wire hydronic (hot water) zone valves
 Gas Millivolt wall / floor heaters
Not For Use On:
 120/240 VAC line-
voltage systems
(without a transformer)
 Heat pumps that have
(Y2) two compressor
stages
Locate and gather the following items for ease of installation

Lux Products LUX/GEO Specifications

General

Brand	Lux Products
Model	LUX/GEO
Category	Thermostat
Language	English

Summary

Pre-Installation Steps

Switch Power Off and Take Photo

Crucial step to disconnect power and document existing wiring before proceeding.

Wiring Terminal References

Conventional System Wiring

Terminal guide for conventional gas/oil/electric HVAC systems with wire color references.

Heat Pump System Wiring

Terminal guide for heat pump HVAC systems with wire color references and notes.

LUX Power Bridge Wiring

Thermostat and Furnace Connections

Instructions on how to wire using the Power Bridge at both thermostat and furnace.

Power Bridge Installation: Conventional

Conventional System Wiring Diagram

Visual guide illustrating Power Bridge setup for conventional systems.

Power Bridge Installation: Heat Pump

Heat Pump Wiring Diagram

Visual guide illustrating Power Bridge setup for heat pump systems.

Power Bridge Installation: Cool Only

Cool Only Wiring Diagram

Visual guide illustrating Power Bridge setup for cool-only systems.

Power Bridge Installation: Heat Only

Heat Only Wiring Diagram

Visual guide illustrating Power Bridge setup for heat-only systems.

Power On and Configuration

Powering On the LUX/GEO

Configuring System Settings

Connecting to Your Mobile Device

Pairing Thermostat with Mobile Device

Selecting Home Wi-Fi Network

Finalizing and Advanced Setup

Troubleshooting Connection Issues