CONNECTING THE WIRES:
When attaching the wires to the thermostat, please ensure that the bare wire
ends are held ALL the way into the terminal block while the screw is being
tightened.
WIRING BASE PLATE NOTICE:
This thermostat model is part of a family of similar models that have the
same general visual appearance. Even though this base plate may look the
same as base plates from other models, the wiring connections may have
different terminal letters for different purposes. Please do not interchange
the back plates and/or thermostat front halves of other similar looking
models. Doing so may cause undesired heating and/or cooling operation to
occur.
6
WIRING INFORMATION:
To Next Page
Loading...
