Lux Products WIN100 Series User Manual

WIN100 SERIES
SMART TEMP
®
ELECTRONIC THERMOSTAT
Complete, Easy To Read
INSTALLATION AND
OPERATING INSTRUCTIONS
IMPORTANT!
Please read all instructions carefully before
beginning installation.
Save them for future reference.
COMPATIBILITY
Thank you for your confidence in our product.
To obtain the best results from your investment,
please read these instructions and acquaint
yourself with your purchase before installing your
new thermostat. Then follow the installation pro-
cedures, one step at a time. This will save you
time and minimize the chance of damaging the
thermostat and the systems it controls. These
instructions may contain information beyond that
required for your particular installation. Please
save for future reference.
W A R N I N G :
FOR USE ONLY WITH AIR CONDITIONERS AND
SPACE HEATERS THAT AUTOMATICALLY
RESTART COOLING OR HEATING OPERATION
AFTER POWER RECONNECTION
Your WIN100 Programmable Outlet Thermostat
is compatible with 120Volt, 15 Amp Plug, 60 Hz
Window Air Conditioning Units and Portable
Space Heaters only. It cannot be used with typi-
cal 24 V systems, hydronics systems, or heat
pumps. Ask your dealer for other LUX
®
thermo-
stats to control those systems.
LUX PRODUCTS CORPORATION
Mt. Laurel, New Jersey 08054, USA
43382-05
FEATURES
●
Heating and Cooling
●
Electronic
●
Programmable
●
Plugs into normal 110 Volt 15
Amp Electrical Outlet
●
5/2 Day Programming
(Weekdays and Weekends can
be different)
●
Energy Star
®
Compliant
●
Default Energy Star
®
Approved Program
●
Positive On/Off Switch
●
Easy to Install
●
4 Periods Per Day
●
120VAC Powered with
Batteries
●
2 G13A size 1.5V Alkaline
Button Cell Batteries Included
(For Clock Only)
●
Temporary and Constant
Temperature Override
●
Separate Programs for
Heating and Cooling
●
Armchair Programming
●
Easy Programming with LUX
Speed Dial
®
(Patent #
5,673,850)
●
Battery Free Nonvolatile
Memory For All Programs And
Settings
●
ETL Approved
●
User Calibration
●
On Screen Low Battery
Indicator
●
F/C Temperature Display
●
Soft Touch Buttons
●
2 Minute Short Cycle
Protection
●
Adjustable Temperature dif-
ferential/Cycle Rate (#1 thru #9)
●
1 Year Warranty
ELECTRICAL RATINGS
●
120V/60 Hz
●
Maximum load is 15 Amps at 120 Volts
●
Power Consumption 2 W (maximum)
●
Plug and Receptacle NEMA 5-15R (normal household 15 Amp
receptacle)
1
2
3
4
5
1. ON/OFF SWITCH
2. SOFT TOUCH BUTTONS
3. LUX SPEED DIAL
®
4. HEAT/COOL SWITCH
5. EXTERNAL TEMPERATURE
SENSOR

Lux Products WIN100 Series Specifications

General

Display	LCD
Programmable	Yes
Wi-Fi Connectivity	No
Voltage	24V
Stages	1 Heat / 1 Cool
Backlight	No
Weight	0.5 lbs
Type	Programmable Thermostat
Temperature Range	40°F to 90°F
Compatibility	Single Stage Heating and Cooling Systems
Battery	2 AA batteries

Summary

Compatibility

Features

Electrical Ratings

Details the electrical specifications including voltage, frequency, and maximum load.

Installation

Location and Preparation

Provides guidance on choosing an installation location and preparing the unit.

Mounting

Completing Installation Steps

Details the final steps to connect and verify the thermostat and connected appliance.

Operating Basics

Run Mode and Key Functions

Explains how to operate the thermostat, including run mode and key functions.

Setting Day and Time

Provides instructions for setting the current day and time on the thermostat.

Temperature Control Modes

Describes how to select between heating and cooling control modes.

Programming

Heating and Cooling Programs

Details how to set up separate heating and cooling programs for weekdays/weekends.

Hold and Override Functions

Explains how to temporarily hold or override temperature settings.

Advanced Features

Calibration Offset

Allows adjustment of the thermostat's measured temperature.

Software Reset and Swing Adjustment

Covers resetting the unit and adjusting temperature cycle controls.

Batteries/Maintenance

Battery Replacement

Instructions for replacing the thermostat's backup batteries.

Technical Assistance

Warranty