GB
50
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
If you can’t fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
Disposal
Disposal of the appliance
This appliance must not be disposed of with
regular household waste! Dispose of the
appliance in the appropriate manner. For
more information, consult your community
waste disposal service.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked plastics
that can be recycled.
– Make these materials available for recy-
cling.
Technical data
Error/Fault Cause Remedy
Motor does not start. Tank empty? Filling with fuel – p. 46
Ignition cable connector
loose?
Push the connector firmly onto
the spark plug.
Ignition cable connector con-
taminated?
Clean connector.
Spark plug contaminated? Cleaning/replacing spark
plugs – p. 49
Spark plug defective?
Distance from electrode to
spark plug too great?
Set gap at 0.7–0.8 mm.
Incorrect fuel? Drain tank and fill up with the
correct fuel.
Motor runs but with interrup-
tions
Is the air filter dirty? Cleaning the air filter – p. 49
The motor does not reach the
maximum speed.
Spark plug contaminated? Cleaning/replacing spark
plugs – p. 49
Distance from electrode to
spark plug too great?
Set gap at 0.7–0.8 mm.
Incorrect fuel? Empty tank and fill up with the
correct fuel.
Strange noise. Screws/parts come loose? Tighten screws.
Foreign objects in the blades? Remove foreign objects.
Blade damaged? Have blade sharpened, or re-
place.
Cut result is not sufficient. Blade is blunt?
WARNING! Risk of fire or environ-
mental damage! Avoid damage
caused by leaking fuel: drain the tank
prior to disposal.
Part number 234869
Displacement 170,1 cm³
Nominal output 2,6 kW
Max. motor speed 2900 min
-1
Tank capacity 800 ml
Amount of engine oil 500 ml
Working width 510 mm
Cutting height 25–75 mm
Number of stages 7
Volume of collecting
sack
60 l
Weight 38 kg
Noise power level
(L
WA
)*
96,9 dB(A)
(K = 3 dB(A))
Noise pressure level
(L
PA
)*
76,9 dB(A)
(K = 3 dB(A))
To Next Page
Loading...
