Luxaire R-410A User Manual

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
659501-LTG-A-1010
TECHNICAL GUIDE
Description
These Luxaire Acclimate™ packaged cooling/heating air
conditioners are designed for outdoor installation. Only utility
and duct connections are required at the point of installation.
The single or two stage gas-fired heaters have aluminized steel
tubular heat exchangers and spark to pilot ignition. They are
available in natural gas with field conversion to propane.
R-410A
ACCLIMATE™ SERIES
DYY MODELS
2 - 5 TON
60 Hertz
Tested in accordance with:
ISO 9001
Certified Quality
Management System

Luxaire R-410A Specifications

General

Brand	Luxaire
Model	R-410A
Category	Air Conditioner
Language	English

Summary

Technical Guide

Description

Overview of Luxaire Acclimate packaged cooling/heating air conditioners.

Component Location

Cooling/Gas Unit Components

Diagram showing the layout and identification of major internal components.

Nomenclature

Model Number Decoding

Explanation of how to interpret the model number for DYY series units.

Features and Benefits

Standard Features Overview

Key standard features contributing to efficiency, flexibility, and durability.

Field Installed Accessories

Accessory Kit Descriptions

Details on optional kits for enhancing unit functionality or meeting specific needs.

Guide Specifications

General Unit Information

Broad overview of unit manufacturing, design, and compliance standards.

Physical Data

Single Stage Gas Heat Specifications

Technical data for single-stage gas heat models including performance metrics.

Two Stage Gas Heat Specifications

Technical data for two-stage gas heat models including performance metrics.

Unit Limitations

Voltage and Temperature Operating Limits

Specifies operational voltage ranges and maximum outdoor temperature for DYY units.

Capacity Performance

Cooling Capacity Tables

Tables detailing cooling performance across various conditions for DYY models.

Airflow Performance

Side Duct Airflow Data

Airflow performance data for units installed with side ductwork.

Bottom Duct Airflow Data

Airflow performance data for units installed with bottom ductwork.

Additional Static Resistance

Static Resistance by Component

Table showing static resistance values for various components and airflow configurations.

Gas Heat Minimum Supply Air

Supply Air CFM by Heat Size

Minimum and maximum CFM requirements for gas heat sizes in cooling and heating.

Sound Performance

Outdoor Sound Power Levels

Sound level measurements in decibels (dB A) across octave bands for outdoor operation.

Electrical Data

Gas Heat Electrical Specifications

Electrical parameters including minimum circuit ampacity and maximum fuse/breaker sizes.

Wiring Diagrams

208/230-1-60 Volt Diagrams

Wiring schematics for units operating on 208/230-1-60V power.

208/230-3-60 Volt Diagrams

Wiring schematics for units operating on 208/230-3-60V power.

460-3-60 Volt Diagrams

Wiring schematics for units operating on 460-3-60V power.

Weights and Dimensions

Unit Weights and Load Locations

Data on unit weights, shipping, operating, and center of gravity for load placement.

Gas Unit Dimensions

Gas Unit Clearances

Required clearances for safe installation and airflow around gas unit dimensions.

Unit Typical Duct Applications

Slab on Ground Installation

Diagram illustrating typical ductwork for units installed on a ground slab.

Unit Typical Roof Curb Installation

Roof Curb Dimensions and Installation

Detailed dimensions and installation guidance for roof curb accessories.

Roof Curb Cross Section

Roof Curb Sealing and Assembly

Cross-section view showing the construction and sealing methods for roof curbs.