6
TESTING THE LUXIFY MODE
UVC MODE
INSERT/ REPLACE YOUR UVC SELF-DISINFECTION BATTERY
Turn on your LUXAMAX AVA on the LUXIFY Mode and place a few drops of water on the metal head. You
will see the water drops are vibrated and become atomized. This is how ultrasound currents break your
skincare products into nanoparticles and make their essential nutrients penetrate 4000 times deeper into
skin layers. Such powerful ultrasonic currents, when inltrated deeply into the skin, give a cleansing and
massage eect to your skin.
Your LUXAMAX AVA features the revolutionary automated UVC disinfecting cap which ensures that
your silicone facial-cleansing brush stays always disinfected and sanitized in a sterile, chemical-free
environment. The UVC disinfection process starts immediately after you have placed the disinfecting cap
on the silicone cleansing brush. Once the self-disinfection is done, it turns o automatically.
. 1 Twist the outer lid counterclockwise, then gently twist the inner lid counterclockwise with your
ngernails.
. 2 To remove the old battery, press the metal buckle beside the battery with your ngertips. The battery
will automatically pop up, then you can simply take out the battery.
. 3 Slot the new battery into the battery socket with the negative side facing up. Then apply downward
pressure until the battery locks in position.
. 4 Once the battery is installed, gently twist the inner lid clockwise with your ngernails to close the
battery lid.
. 5 Now close the outer lid by twisting it clockwise.
Note: The UVC disinfection battery is not inserted in the device in the factory. You should insert it yourself
before the rst use.
To Next Page