Luxier DKPL-6 - User Manual

1 DKPL Rev. 1 06/20
Escutcheon Deck Plate
Model Number:
DKPL-6
DKPL-7
DKPL-10
1
Installation
Kitchen Sink / Bathroom Sink
1. Place the deck plate onto the mounting surface. Align the plate and make sure the unused holes
are covered completely. (NOTE: make sure the supporting rubber spacer is seated properly under the
deck plate.)
2. Place the faucet on the deck plate through the opening. Carefully secure the faucet and the deck
plate with the supplied mounting hardware from the faucet manufacturer. Do not overtighten as it will
damage both the faucet and the deck plate.
Maintenance Guide
Please follow the cleaning material manufacturer’s instructions. Damage caused by improper
treatment will not be covered by product warranty. In addition, pay attention to the following points:
• Regular cleaning can prevent mineral build up on faucet spout.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
• Test the cleaner on a small area before using on the entire surface.
• Use a mild detergent such as liquid dishwashing soap and warm water for cleaning.
• Do not use abrasive / harsh chemical when cleaning the fi xture as they will damage and dull the
fi nish.
• When using spray cleaners, spray fi rst onto a soft cloth or sponge. Never spray directly onto the
faucet as droplets can enter openings and gaps and cause damage.
• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
2

Summary

Installation Guide

Mounting the Deck Plate

Position deck plate on surface, align, cover holes, and seat rubber spacer correctly.

Securing the Faucet

Place faucet on deck plate, attach with hardware, do not overtighten to avoid damage.

Maintenance and Care

Cleaning Recommendations

Use mild detergent, test cleaners, avoid harsh chemicals, spray cloth first, rinse residue.

Limited Lifetime Warranty

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Luxier Escutcheon Deck Plate is a component designed to enhance the aesthetic and functional integration of faucets with various sink types, specifically kitchen and bathroom sinks. It serves as a cover for unused holes on the mounting surface, providing a clean and finished look while ensuring proper faucet installation.

Function Description

The primary function of the Escutcheon Deck Plate is to provide a stable and visually appealing base for faucets, particularly when the sink or countertop has more pre-drilled holes than required by the faucet. It effectively covers these unused holes, creating a seamless and polished appearance. The deck plate also contributes to the overall stability of the faucet by providing a broader mounting surface, which is crucial for preventing wobbling and ensuring a secure installation. It acts as an intermediary layer between the faucet and the sink surface, helping to distribute the weight and pressure evenly. The design ensures that the supporting rubber spacer is properly seated under the deck plate, which is essential for a watertight seal and to prevent damage to the sink surface.

Important Technical Specifications

The Luxier Escutcheon Deck Plate is available in three model numbers: DKPL-6, DKPL-7, and DKPL-10. While specific dimensions for each model are not provided in the manual, these model numbers likely correspond to different lengths, widths, or hole configurations to accommodate a variety of faucet and sink designs. The material composition is not explicitly stated, but typical deck plates are made from durable metals such as brass or stainless steel, often with a finish that matches common faucet materials like chrome, brushed nickel, or oil-rubbed bronze. The design indicates a single large opening for the faucet body and additional smaller holes for securing the plate, suggesting compatibility with single-hole faucets that might be installed on three-hole or four-hole sinks. The inclusion of a supporting rubber spacer is a critical technical detail, as it ensures a snug fit, prevents water ingress, and protects the sink surface from scratches or damage during installation and use. The plate is designed to be secured using the mounting hardware supplied by the faucet manufacturer, emphasizing its role as an accessory that integrates with existing faucet systems.

Usage Features

The installation process for the Escutcheon Deck Plate is straightforward and user-friendly, requiring minimal tools and expertise.

1. Placement: The deck plate is first placed onto the mounting surface (sink or countertop).
2. Alignment: It is crucial to align the plate correctly to ensure that all unused holes are completely covered. This step is vital for both aesthetics and preventing water from seeping into unwanted areas.
3. Spacer Seating: The manual specifically highlights the importance of ensuring the supporting rubber spacer is properly seated under the deck plate. This detail is critical for creating a watertight seal and protecting the mounting surface.
4. Faucet Installation: Once the deck plate is in position, the faucet is placed through the opening in the deck plate.
5. Securing: The faucet and deck plate are then carefully secured using the mounting hardware provided by the faucet manufacturer. A key caution is to avoid overtightening the hardware, as this can damage both the faucet and the deck plate. This emphasizes the need for a gentle yet firm approach during installation.

The deck plate is designed for use in both kitchen and bathroom sink applications, indicating its versatility across different plumbing fixtures. Its primary usage benefit is to provide a clean, finished look, especially when upgrading a faucet without replacing the entire sink, allowing a single-hole faucet to be installed on a multi-hole sink.

Maintenance Features

Proper maintenance of the Escutcheon Deck Plate is essential to preserve its appearance and longevity. The manual provides comprehensive guidelines for cleaning and care, emphasizing the use of appropriate cleaning materials and techniques.

• Manufacturer's Instructions: Users are advised to follow the cleaning material manufacturer's instructions, as damage caused by improper treatment will not be covered by the product warranty. This highlights the importance of selecting suitable cleaning agents.
• Regular Cleaning: Regular cleaning is recommended to prevent mineral buildup on the faucet spout and, by extension, on the deck plate, which can accumulate similar deposits.
• Cleaner Compatibility: Before using any cleaner, users should carefully read the product label to ensure it is safe for the material of the deck plate.
• Spot Testing: It is recommended to test the cleaner on a small, inconspicuous area before applying it to the entire surface to prevent unforeseen damage or discoloration.
• Mild Detergent Use: The preferred cleaning method involves using a mild detergent, such as liquid dishwashing soap, mixed with warm water. This gentle approach is effective for most routine cleaning tasks without harming the finish.
• Avoid Abrasive/Harsh Chemicals: A critical warning is to avoid using abrasive or harsh chemical cleaners. Such products can damage and dull the finish of the deck plate, leading to irreversible aesthetic degradation.
• Spray Cleaner Application: When using spray cleaners, it is advised to spray the cleaner first onto a soft cloth or sponge, rather than directly onto the faucet or deck plate. This prevents droplets from entering openings and gaps, which could cause internal damage or leave residue in hard-to-reach areas.
• Thorough Rinsing: After cleaning, the deck plate should be thoroughly rinsed with clean water to remove any cleaner residue. This step is crucial to prevent chemical buildup that could damage the finish over time.
• Soft Cloth Drying: Although not explicitly stated, it is generally recommended to dry the surface with a soft cloth after rinsing to prevent water spots and maintain the luster of the finish.

These maintenance guidelines are designed to help users keep their Escutcheon Deck Plate in pristine condition, ensuring its aesthetic appeal and functional integrity for an extended period. The emphasis on gentle cleaning methods and avoiding harsh chemicals underscores the delicate nature of modern faucet finishes and the importance of proper care.

Luxier DKPL-6 Specifications

General

Brand	Luxier
Model	DKPL-6
Category	Bathroom Fixtures
Language	English