Luxul XWC-1000 User Manual

Fold Fold Fold
READ ME FIRST
BEFORE YOU BEGIN INSTALLATION
X
Access Point Firmware: Be sure that the firmware of any APs you intend to
manage with the Wireless Controller is v5 or newer. Visit the AP Firmware
upgrade page at luxul.com/ap-upgrade for details.
X
Controller Setup Sequence: Once you configure the XWC-1000 Wireless
Controller, the Controller will automatically configure and manage all
compatible APs on the same subnet. APs can be added or removed at any
time, however. A DHCP server is required on the network.
X
Firmware Updates: The XWC-1000 Wireless Controller automatically
checks for firmware updates of Controller-compatible APs and the Wireless
Controller itself, but requires Internet access to do so. The Wireless
Controller will still operate without Internet access, but firmware updates
will not be available.
1
Physical Installation
X
Connecting Devices: The XWC-1000 Wireless Controller simply connects
to the network along with any compatible Access Points.
Wireless Controller
PoE Injector or
Compatible PoE Switch
AP
AP
LAN
Wireless Controller
XWC-1000
Package Contents:

XWC-1000 Wireless Controller

Rack Mount Kit

Power Cord
QUICK INSTALL GUIDE
Sales
P: 801-822-5450
E: sales@luxul.com
Technical Support
P: 801-822-5450 Option 3
E: support@luxul.com
LUX-QIG-XWC-1000-v4 0281709
Copyright and Trademark Notices
No part of this document may be modified or adapted in any way, for any purposes without permission
in writing from Luxul. The material in this document is subject to change without notice. Luxul reserves
the right to make changes to any product to improve reliability, function, or design. No license is granted,
either expressly or by implication or otherwise under any Luxul intellectual property rights. An implied
license only exists for equipment, circuits and subsystems contained in this or any Luxul product.
© Copyright 2016 Luxul. All rights reserved. The name Luxul, the Luxul logo, the Luxul logo mark and Simply
Connected are all trademarks and or registered trademarks of Luxul Wireless, Inc. All other trademarks and
registered trademarks are property of their respective holders.

Luxul XWC-1000 Specifications

General

2.4 GHz	-
VLAN support	Yes
Networking standards	IEEE 802.1Q
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	- Mbit/s
Number of virtual APs (VAPs)	16
Security algorithms	AES, TKIP, WPA, WPA2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Input current	0.3 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	8.6 W
Placement	Table
Product color	Black
LED indicators	Activity, Power, System
Operating temperature (T-T)	32 - 104 °C
Sustainability certificates	CE, RoHS

Weight and Dimensions

Width	178.8 mm
Height	44.5 mm
Weight	1470 g