To Next PageTo Next Page
Need help?Do you have a question about the LVI MEC and is the answer not in the manual?
Connects radiators as slave units, bypassing the thermostat for master control.
Allows manual or automatic reduction of radiator temperature via thermostat or control conductor.
Bypass the radiator's thermostat when integrated into a room control system.
Controls power, room temperature selection between 10-30°C, and frost protection.
Selects no reduction, constant -3.5°C reduction, or automatic reduction via external control.
Sets maximum surface temperature to 80°C (N) or 60°C (L) for thermal output.
Secures the transparent cover over the radiator controls to prevent tampering.
Clean the radiator using only mild detergents.
Resets automatically if too hot; check for blockages or contact support.
Do not cover the radiator; it must not be used for drying clothes.
Only manufacturer-approved agents can perform repairs; contact for oil leakage.
General
