To Next PageTo Next Page
Need help?Do you have a question about the LVI Yali Series and is the answer not in the manual?
Secure wall brackets 10-15 cm from radiator ends. Use brackets to measure height.
Mount horizontally, observe minimum distances, avoid contact with live parts.
Connect via terminal box by qualified electrician; use break-off openings for conduits.
Connect on terminal blocks 2 and 4 to bypass thermostat for slave operation.
Set thermostat knob or connect control conductor for manual/automatic reduction.
Bypass radiator thermostat by connecting as a slave radiator for external control.
Use plastic hook for cable coiling; ensure plug is fully inserted into terminal box.
Use on/off switch and thermostat knob (10-30°C) for temperature control.
Select manual, automatic, or no reduction via the lower knob.
Set maximum surface temperature to 80°C (N) or 60°C (L).
Lock the transparent cover to prevent unauthorized access to controls.
Clean the radiator using only mild detergents.
Includes overheating protection, do not cover, cord safety, and child supervision.
10-year warranty on radiator, 2 years on electricals. Follow WEEE for disposal.
Dispose of product at designated electrical/electronic waste facilities, not domestic waste.
General| Model | Yali Series |
|---|---|
| Category | Heater |
| Material | Steel |
| Voltage | 230V |
| Frequency | 50Hz |
| Adjustable Thermostat | Yes |
| Overheat Protection | Yes |
| Tip-over Protection | No |
| Type | Electric |
| Mounting | Wall-mounted |
| Remote Control | Optional |
| Power | Ranges from 250W to 2000W (depending on model) |
