How to Charge the Battery
Pull up the battery from scooter,Insert the main charger plug into the charging socket of the battery. Insert the chargers AC power plug into the home power
socket, and the battery starts charging when the charger indicator turns red.The battery is fully charged if the charger indicator turns from red to green.
2
TIPS:
Short circuit of the cathode and the anode at the battery's input.
Keep it away from children, fire and heat source. It is strictly forbidden
to throw it into the fire;Violent movements, shock and extrusion are
prohibited;
Only the specified charger can be used, and other chargers are
prohibited to charge the battery;
This product has been subject to strict inspection before leaving
factory, and it is strictly prohibited to dismantle it. Please contact our
company's after-sales department for any question.
Please charge the battery to half-saturation state when storing or transporting it (after the battery is discharged, charge it for 3 hours).
Place it in a dry and ventilated place;
Battery and charger should be kept in a clean,dry,and ventilated place. Keep them away from corrosive materials,power source and heat source;
Storage conditions: ambient temperature -20-35 °C, humidity <65% RH;
When storing the charger, please disconnect it from the battery.
Regular maintenance can enhance the service life and driving safety of the electric scooter. Please refer to the following suggestions and take care of your
scooter.
TIPS:
Do not expose the battery to water, and prevent it from being
damped by water or rained.
Charge temperature: 0-45 °C, discharge temperature: -20-45 °C;
Battery capacity will be reduced when placed in a low-temperature
environment;
Charge the battery when you use it, but make sure to charge it before
the capacity is lower than 20%. When it is not used
for a long time, please remove it from the scooter.
Storage, Maintenance and Transportation
13 14
BATTERY USE INSTRUCTIONS BATTERY USE INSTRUCTIONS
To Next Page
Loading...