LX Era
Release notes
Document name: LX EUM
Document revision: R1
• Minor code improvements
• Active TP, APT, Task and DB files (TP, APT and AS) synchronization between 1st and 2nd
seat.
• General bt/wifi improvements
• We can now send igc file to mail address
• We can now connect to device with flarm data and receive that data
• Improvements for bluetooth menu
• Minor code improvements
• Active TP, APT and task synchronization between 1st and 2nd seat.
• Current and required efficiency navboxes added
• AoA page added
• Airport icons can now be custom colour
• Can now be updated over CAN
• Device now remembers networks it was connected to
• General code improvements and optimizations
• Device now complies with minimum password length
• Added additional characters that might be used in passwords
• Improvements to icons
• Fixed Task sector issues
• General GUI improvements
• Improved translations into slovene
• Improved finish flight conditions
• Allowing longer pilot names
• Fixed Altitude warning bug when in ft
• Fix for FlarmNET file loads
• Go to next task moved to Competition manager
• Added cloud settings and ability to insert email addresses
• Small fix to AHRS page
• Added north up orientation
• VNE warning depends on IAS instead of TAS now
• Settable SSID for Wifi and BT
• Setup menu reorganised
• Colour for track and bearing is now selectable
• Fixed origin for maps in North up orientation
• Support for ballast dump added
• Removed user port settings from era, everything now set in NMEA settings
10.10 1.3 (2019-01-25)
• General code improvements
• Fixed issue with high vario average
• Added option for line zone in start and finish task
• Added quick next/previous buttons in edit zone menu
• Fixed thermal average unit conversion
• Added heading (track) vector
• Needle refresh rate increased
Device manual Public 89
To Next Page
