5
Ⅰ.Introduction
The robotic pool cleaner HJ2032 is a new type of highly efficient and energy-saving
swimming pool cleaning robot. Through its advanced computer controlled program, it can
clean the pool walls and bottom automatically. At the same time, it filters the pool water and
gets rid of suspended particles without replace the pool water. It’s totally environmental-
friendly.
For safe operation, the cleaner works on 24V direct current. Please read this user manual
carefully before use.
Ⅱ. Safety
1． Power supply unit position：
Power supply unit need to be placed in proper position so as to reach the distal end of pool
for the cleaner, meanwhile as least 3.5m from pool edge.
2．important：
Before power on, make sure local voltage/frequency matches the rated voltage/frequency
of the cleaner
Rated input voltage：110VAC (120VAC) / 220VAC (230VAC)
Frequency：50Hz/60Hz
To Next Page
Loading...