Need help?Do you have a question about the Lyngdorf TDAI-2170 and is the answer not in the manual?
Mutes audio or accesses the main menu.
Adjusts the audio volume.
Turns the device on and into standby.
Optimizes sound quality for the whole room.
Optimizes sound quality for a specific position.
Automatic calculation of filters after measurements.
Steps for installing the driver on Windows.
Configures the RoomPerfect system.
Manages audio clipping correction.
Starts guided speaker/RoomPerfect setup.
Configures speaker output settings.
Restores default system settings.
When speaker or furniture position changes.
Check microphone and cable connection.
Details on coaxial, optical, and USB inputs.
General| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
|---|---|
| Digital audio coaxial in | 2 |
| Digital audio optical in | 4 |
| Digital audio coaxial out | 1 |
| Speakers connectivity type | RCA |
| Audio decoders | DSD |
| Amplifier class | - |
| Output impedance | 75 Ω |
| Audio output channels | 2.0 channels |
| Peak power per channel | - W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 0.006 % |
| RMS power output per channel (4 Ohm) | 170 W |
| Purpose | Home |
| Product color | Black |
| Volume control | Rotary |
| Cables included | AC, XLR |
| Connectivity technology | Wired |
| Manual | Yes |
| Maximum current | 30 A |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.34 W |
Weight and Dimensions| Depth | 360 mm |
|---|---|
| Width | 450 mm |
| Height | 100 mm |
| Weight | 8000 g |
To Next Page
