Do you have a question about the Lynx 2000 G-Touring 700 and is the answer not in the manual?
Engine Type | 2-Stroke |
---|---|
Starter | Electric |
Brake Type | Hydraulic Disc |
Track Length | 136 in |
Track Width | 15 in |
Details the duration and scope of the warranty for new snowmobiles.
Outlines the manufacturer's responsibilities for repairs or replacements under warranty.
Specifies customer obligations for valid warranty work.
Lists items not covered and limits on liability.
Provides steps for resolving warranty disputes.
Explains where to find critical chassis and engine identification numbers.
Details identification for track and gearbox components.
Essential checks to perform before operating the snowmobile.
Guidelines and rules for safe snowmobile operation.
Step-by-step instructions for starting the engine in cold weather.
Instructions for using the electric start system.
Methods for safely shutting down the engine.
How to operate the transmission and reverse systems.
Advice on body positioning for various terrains and loads.
Recommended break-in procedures for optimal performance.
Recommended actions after operating the snowmobile.
Procedures for starting the engine in case of starter failure.
Details on recommended fuel type, octane, and lubrication oils.
Information on the oil injection system, filter, and pump.
Guidelines for cooling system fluids and antifreeze.
Identification and function of handlebar-mounted controls.
Draining, refilling, and maintenance of liquid cooling systems.
Maintenance of the cooling fan and belt for air-cooled engines.
Steps for drive belt removal, installation, and initial run-in.
Maintenance and adjustment of drive and driven pulleys.
Checking and adjusting chain and track tension and alignment.
Overview of steering system parts and functions.
Adjusting ski toe-out and pressure for optimal steering.
Maintenance of guide rails and slide rail systems.
Checking and adjusting the mechanical brake system.
Checking hydraulic brakes and brake fluid levels.
Overview of scheduled maintenance points and intervals.
Guidelines for storage and preparation for the operating season.
Diagnosing and resolving issues when the engine fails to start.
Troubleshooting engine stops and irregular operation.
Diagnosing power loss and engine overheating problems.