Do you have a question about the Lynx Super Touring 600 and is the answer not in the manual?
Cylinders | 2 |
---|---|
Fuel system | Carburetor |
Starter | Electric |
Carburetion | 2 x Mikuni VM34 |
Track Width | 380 |
Cooling system | Liquid |
Brakes | Hydraulic disc |
Defines what the warranty covers regarding material and workmanship for the snowmobile.
Specifies the duration of the warranty for private and commercial use owners.
Outlines requirements for maintaining warranty, including routine maintenance and proper registration.
Steps to follow and documentation required when seeking warranty service for a defect.
Details Bombardier's obligations for repairing or replacing defective parts under warranty.
Lists items and conditions not covered by the limited warranty, such as wear and tear or abuse.
Explains the extent of Bombardier's liability and disclaimers for implied warranties.
Operation of primary controls located on the handlebars for driving and parking.
Instructions for using the gear shift, ignition switch, and reverse system.
Details on the tether cut-out switch for engine safety and security.
How to use the emergency cut-out switch to stop the engine quickly.
A comprehensive list of checks for controls, fluids, and general condition before riding.
How to use the primer button for starting snowmobiles equipped with this feature.
Step-by-step guide for starting a cold engine, including choke and throttle usage.
Instructions for starting the engine when it is already warm, without using the choke.
Methods for starting the engine using manual rewind or electric starter systems.
Troubleshooting steps for when the engine turns over but does not start, covering ignition, fuel, and spark issues.
Diagnosing and fixing issues related to poor engine acceleration or loss of power.
Troubleshooting causes of engine backfiring, such as spark plug or ignition timing problems.
Identifying and resolving causes of engine misfires, including fuel and spark plug issues.
Troubleshooting why the snowmobile cannot achieve its maximum speed, checking belt and pulleys.