Need help?Do you have a question about the Lynx 2000 Enduro 600 SP and is the answer not in the manual?
General| Manufacturer | Lynx |
|---|---|
| Category | Snowmobiles |
| Displacement | 599 cc |
| Fuel Capacity | 10.6 gallons |
| Brake Type | Hydraulic brake |
| Model | 2000 Enduro 600 SP |
| Engine | Rotax® 600 ACE™ |
Details the duration of coverage for new snowmobiles and accessories.
Outlines Bombardier's responsibilities for repairs and replacements under warranty.
Specifies customer requirements for valid warranty service, including notification and proof of purchase.
Lists items and conditions not covered by the warranty, such as wear and tear and misuse.
Sets limits on Bombardier's liability for damages, including consequential and incidental damages.
Provides guidance on resolving warranty disputes and seeking assistance from dealers or distributors.
Covers the warranty duration for replacement parts, kits, and accessories.
Explains Bombardier's commitment to repairing or replacing defective parts.
Outlines the process for claiming warranty on parts, including proof of purchase.
Lists items and conditions not covered under parts warranty.
Sets limits on Bombardier's liability for part-related damages.
Offers support for issues related to parts warranty claims.
Step-by-step guide to starting the engine in cold conditions.
Instructions for using the electric starter system.
How to properly shut down the snowmobile engine.
Explains gear selection for snowmobiles with a syncro gear box.
Information on chaindriven models and optional reverse gear.
Details on the lubrication system for the engine's oil.
Recommendations for using antifreeze in the fuel for cold conditions.
Steps for engaging and disengaging the electronic reverse system.
Guidance on the initial running-in period for the snowmobile.
Advice on body positioning for optimal snowmobile handling.
Information on fuel filters and fuel pumps.
Steps for adjusting the snowmobile's carburettor for optimal performance.
How to adjust the engine's idle speed for twin carburettor models.
Guidance on adjusting needles for cold weather driving.
Recommendations for checking and replacing the oil filter.
Importance of correct oil pump adjustment for engine health.
Procedure for adjusting the oil pump linkage.
Instructions for refilling and draining the cooling system for liquid-cooled models.
Information on the cooling system for air-cooled engine models.
Overview of power transmission components like clutch and variators.
Step-by-step guide for replacing the drive belt.
Maintenance and adjustment procedures for the drive pulley.
Explanation of the IBC clutch function and service.
Guidance on servicing and adjusting the TRA-pulley system.
Procedures for adjusting and servicing the driven pulley.
How to check and adjust chain tension on chain-driven models.
Instructions for adjusting track tension and alignment.
Procedures for ensuring proper track alignment.
How to check and adjust the mechanical brake system.
Information on adjusting the hydraulic brake and checking fluid.
Common reasons and solutions for engine starting failures.
Troubleshooting steps for when the engine unexpectedly stops.
Diagnosing and fixing irregular engine performance issues.
Identifying causes for reduced engine power output.
Troubleshooting steps for engine overheating problems.
To Next Page