Lynx L15ICE User Manual

Lynx L15ICE 16
Cleaning and Care Procedures
L15ICE
13) Posion and lock the ice chute onto the front and
rear frame pipes by pushing the chute down unl
it clicks onto both pipes.
14) Slide in the water tank along the rails at the
boom of the right and le brackets unl it clicks
into place.
15) Ret the sucon tube onto the water tank inlet by
pushing the joint to lock it securely in the direcon
of the arrows. A loose ng may cause a water
leak.
16) Hook each separator onto the rail, and pull it hard
toward you unl it locks in place with a click. Ret
all the separators in the same way.
17) Ret the slope in its correct posion.
18) Close the water supply line shut-o valve.
19) Discard the sanizing soluon.

Lynx L15ICE Specifications

General

Brand	Lynx
Model	L15ICE
Category	Ice Maker
Language	English