Lyon 2000 Series - Sway Bracing Patterns; Top View Bracing Diagrams; Front and Side View Bracing; Unit Bracing Connections

7 pages

To Next Page

To Previous Page

2000 SERIES INDUSTRIAL CLIP SHELVING ASSEMBLY

INSTRUCTIONS

#7002376 / 12-2020

www.lyonworkspace.com

SWAY BRACING PATTERNS – NOTE: Bracing patterns represent the minimum bracing required for units 8’-1” high and under in Seismic Zone 0.

Back and Side Bracing – Top View… Side Bracing – Side View

Back-to-back units share common

back sheet or sway brace.

Side-to-side units share common

upright sheet or sway braces.

Indicates bay

reference in “Side

Bracing - Side

View” (right).

Indicates location of sway brace pair.

Indicates bay

reference in “Back

Bracing - Front

View” (below).

Back Bracing – Front View

For more than 4 bays wide, repeat the 4 wide

pattern (i.e. Bay 5 the same as Bay 1, Bay 6 the

same as Bay 2, etc.).

Unit Detail for Back and Side Bracing – Top View

Back Panel or Sway Brace