Lyx Pro VRI10 User Manual

VRI10
ISOLATION
SHIELD
User Guide
Hello!
Welcome to the LyxPro™ family. This guide helps you get to know your new microphone isolation shield a little better.
For additional information and technical support, please contact our helpful team at info@lyxpro.com.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty
for details.
Intended Use
This portable microphone shield is designed to reduce room ambience when recording vocals and other live
recording devices. Its walls consist of metal and foam panels that can be easily positioned behind your
microphone to create a "dry" recording in any environment.
What’s in the Box?
Microphone Shield
Mounting Hardware Set
User Guide
Parts & Controls
1. Stationary Panels (3)
2. Folding Panels (2)
3. Stability Feet (3)
4. Position Locks (2)
5. Stand Clamps (2)
6. Clamp Levers (2)
Setting Up:
1. To unfold side Folding Panels (2), turn Position Locks (4) and Stability Feet (3) counterclockwise.
2. Position panels as desired, and tighten locks and feet by turning clockwise to secure panels in place.
3. Set microphone booth on flat, stable surface such as studio desk.
2
4
1
6
5

Lyx Pro VRI10 Specifications

General

Brand	Lyx Pro
Model	VRI10
Category	Enclosure
Language	English

Summary

Intended Use

What's in the Box

Parts and Controls

Stationary Panels

Three stationary panels forming the core structure of the isolation shield.

Folding Panels

Two folding panels that allow for adjustable positioning and storage of the isolation shield.

Stability Feet

Three feet providing stability to the isolation shield on various surfaces.

Position Locks

Two locks used to secure the desired panel positions of the isolation shield.

Stand Clamps

Two clamps for attaching the isolation shield to a microphone stand.

Clamp Levers

Two levers used to tighten or loosen the stand clamps for secure mounting.

Setting Up

Initial Setup and Securing

Unfold panels, position them, and tighten locks and feet for stability.

Placement on Surface

Position the microphone booth on a flat, stable surface like a studio desk.

Mounting on Stand

Loosen and Slide

Loosen clamp levers and screws, then slide the stand through the clamps.

Tighten Mount

Tighten clamp levers clockwise to secure the shield onto the microphone stand.

Mounting Microphone

Attach Support Bar

Remove stability foot, attach support bar to the support pole.

Mount Microphone

Attach microphone to the support bar and tighten the pole securely.

Specifications