EasyManua.ls Logo

LyxPro SPA-12BAT User Manual

LyxPro SPA-12BAT
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PORTABLE PA
SPEAKER SYSTEM
User Guide
LY XSPA12BAT
Thank you for purchasing the LyxPro SPA-12BAT Portable PA Speaker System and welcome to the LyxPro™ family. This User Guide
should provide a practical overview of this product’s features and usage applications. We hope you nd it helpful.
This User Guide is also intended to provide guidelines to ensure that operation of this product is safe and does not pose risk to the
user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for household
use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.
Features
Two (2) wireless hand-held microphones
Built-in handle and rolling wheels
Built-in Bluetooth receiver
USB & SD card readers
Built-in 2-band equalizer
Two (2) wired microphone inputs
3.5mm stereo auxiliary input
RCA L/R (Red & White) inputs
Mix output to daisy chain other speakers
12” low frequency woofer
70 Watt RMS power
Built-in 4-hour rechargeable battery
What’s in the Box?
1 x SPA-12BAT portable battery PA system
2 wireless hand-held transmitters
1 x IR remote
1 x power cord
1 x user guide
Safety Precautions
1. Installation and/or repair of the speaker cabinet must be carried out by qualified personnel according to approved safety standards.
2. Do not clean plastic enclosure with solvents or petrochemical-based cleaners.
3. Do not place lighting equipment or other heat-generating objects on speaker cabinet.
4. Do not place speaker cabinet in water or expose to rainfall. This poses a risk of a hazardous short circuit.
5. Do not stack speaker cabinet in a manner that could cause injury if it becomes dislodged.
6. Before installation, ensure that voltage and frequency of power outlet match power requirements of the speaker.
7. Make connections to the speaker first, before connecting to main power.
8. Ensure that power cord is never crimped or damaged by sharp edges. Do NOT allow power cord to come into contact with other
cables. Only handle power cord by the plug when disconnecting or connecting to an electrical outlet.
9. If fuse replacement is needed, be sure to use one of identical rate and dimensions.
This product shall not be treated as household waste. Instead, it shall be dealt with in accordance with regulations of recycling electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
to the environment and to human health, which could otherwise be caused by inappropriate waste handling of this product. The
recycling of materials will help conserve natural resources. For more detailed information about recycling of this product, please
ontact your local city oce, your household waste disposal service or the shop where you purchased the product.
1
Question and Answer IconNeed help?

Do you have a question about the LyxPro SPA-12BAT and is the answer not in the manual?

LyxPro SPA-12BAT Specifications

Audio Specifications IconAudio Specifications
speaker typeActive
frequency response70Hz-18KHz
power output70W
maximum sound pressure level110dB
nominal sensitivity93dB
Driver Specifications IconDriver Specifications
low frequency driver12" Woofer 30 oz. 1.5" VC 4 ohm
high frequency driver1" Ti. Diap 8ohm
Connectivity IconConnectivity
impedance4ohm
input connections1/4" Mic/Line Input, Aux Input, 2 RCA Line
Physical Characteristics IconPhysical Characteristics
enclosure materialPlastic
input dimensions25.5” x 16.5” x 14.17"
weight39.6 lbs.

Summary

Product Features and Contents

Key Features

Lists the main functionalities and components of the portable PA speaker system.

What's Included in the Box

Details all items provided with the portable PA speaker system.

Safety Precautions

System Controls and Connections

USB/SD/Bluetooth Media Player Controls

Details the playback controls for USB, SD card, and Bluetooth media.

Volume and Tone Adjustment

Explains controls for master volume, bass, treble, echo, and microphone levels.

Microphone and Auxiliary Inputs

Describes microphone inputs, stereo auxiliary input, and line inputs.

Wireless Microphone System

Covers indicators and volume controls for VHF wireless microphones.

Power and Connectivity Ports

Details power input, fuse, charge indicator, and power switch.

Operating the Speaker System

Charging and Powering On

Instructions for charging the internal battery and powering the unit on.

Using VHF Wireless Microphones

Steps for inserting batteries, connecting, and operating wireless microphones.

VCV Voice Control Function

Explains how the VCV switch prioritizes microphone audio over music playback.

Connecting to Bluetooth

Guides on pairing a mobile device with the speaker via Bluetooth.

Using the Remote Control

Information on operating the infra-red remote control for the media player.

System Specifications