DISASSEMBLY PROCEDURES
1.
DISASSEMBLE THE BOTTOM PANEL AND BACK PANEL.
(A) REMOVE 6 PCS HEXAGON SOCKET SCREW FROM THE BOTTOM PANEL.
(B) REMOVE 4 PCS SCREW FROM THE BOTTOM PANEL.
(C) REMOVE 3 PCS HEXAGON SOCKET SCREW FROM THE BACK PANEL.
(D) REMOVE 2 PCS NUT FROM THE BACK PANEL.
(E) REMOVE 4 PCS SCREW FROM THE BACK PANEL.
(Fig1)
2.
DISASSEMBLE THE MAIN PCB ASS’Y.
(A)REMOVE 3 PCS SCREW FROM THE MAIN PCB ASS’Y.
(Fig2)
To Next Page
Loading...
