6
|
Studiophile AV 40 User Guide
Appendices
7
Appendix A - Technical Specifications
Type: Two-way desktop reference monitor
LF Driver: 4" diameter, magnetically shielded and curved cone with
high-temperature voice coil
HF Driver: 1" diameter, magnetically shielded silk dome tweeter
Frequency Response: 85 Hz - 20 kHz
Crossover Frequency: 2.7 kHz
RMS SPL: 101.5dB @ 1 meter
S/N Ratio: > 90dB (typical, A-weighted)
Input Connectors: left and right RCA Line input, left and right 1/4" TRS input and
1/8" aux input
Polarity: positive signal at “+” input produces outward low-frequency
cone displacement
Dynamic Power: 20 watts continuous, per channel into 4
Ω
Input Impedance: 10 k Ω unbalanced, 20 k Ω balanced
Input Sensitivity: 100 mV pink noise input produces 90 dBA output SPL at 1
meter with volume control at maximum
Protection: RF interference, output current limiting, over temperature, turn
on/off transient, subsonic filter
Indicator: Blue power LED ring around volume knob on front panel
Power Requirements: 100-120V/~50/60Hz, 220~240V/~50/60Hz; powered via
detachable 2-conductor line cord
Cabinet: Vinyl-laminated MDF
Dimensions: 8.75" (H) x 6" (W) x 7.25" (D)
Weight: 14 lbs./6.34 kg
Specifications subject to change without notice
To Next Page
Loading...
Need help?
General
