9
Directional Buttons
HyperControl Mode: Press the
button next to the directional buttons to put them in HyperControl
Mode. In this mode, use the directional buttons to navigate around highlighted controls, virtual
instruments, or plug-ins.
Inst/FX Mode: Press the Inst/FX button next to the directional buttons to put them in Inst/FX Mode. In
this mode:
• Use the left and right directional buttons to shift the controls (faders or knobs, which also need
to be in HyperControl Inst/FX Mode) to another page of parameters. The keyboard's display will
show the name of the current parameter, value, and control.
• Use the up and down directional buttons to select another instrument or effect plug-in from the
insert effect slots. The keyboard's display will show the name of the current instrument or effect
plug-in.
Track Select Mode: Press the Track button next to the directional buttons to put them in Track Select
Mode. In this mode:
• Use the left and right directional buttons to select another bank of tracks. The keyboard's
display will show the name of the current track and bank.
• Use the up and down directional buttons to select an adjacent track. The keyboard's display will
show the name of the current track and bank.
To Next Page
Loading...
