M-Audio C Series - Appendix; Technical Specifications

22
Appendix (English)
Technical Specifications
All specifications are measured at 20 kHz bandwidth. Specifications are subject to change without notice.
Mic Inputs 1-2 (balanced XLR)
Frequency Response
20 Hz – 20 kHz (+0.1 dB)
Dynamic Range
104 dB (A-weighted)
Signal-to-Noise Ratio
104 dB (+1.0 dBu, A-weighted)
THD+N
0.002%
Preamp EIN
-128 dBu (max gain, 150 Ω source,
A
-weighted)
Max Input Level
+1.5 dBu
Gain Range
55 dB
Line Input 1-2 (balanced 1/4” [6.35 mm] TRS)
Frequency Response
20 Hz – 20 kHz (+0.05 dB)
Signal-to-Noise Ratio
101 dB (1 kHz, +4 dBu, A-weighted)
THD+N
0.002%
Max Input Level
16 dBu
Gain Range
55 dB
Inst Input 1-2 (unbalanced 1/4” [6.35 mm] TS)
Frequency Response
20 Hz – 20 kHz (+0.05 dB)
Dynamic Range
100 dB (A-weighted)
Signal-to-Noise Ratio
98 dB (+ 4 dBu, A-weighted)
THD+N
0.005%
Max Input Level
6 dBu
Input Impedance
1 MΩ
Gain Range
24 dB
Main Outputs, L and R (balanced 1/4” [6.35 mm] TRS)
Frequency Response
20 Hz – 20 kHz (+0.05 dB)
Dynamic Range / Signal-to-Noise Ratio
106 dB (A-weighted)
THD+N
0.005%
Max Output Level
+13 dBu (1 kHz, -1 dBFS)
Headphone Output (1/4” [6.35 mm] TRS)
THD+N
0.005%
Output Impedance
10 Ω