M-Audio Delta 44 - Delta 44 Hardware Settings and PowerSDR Configuration; Hardware Settings Tab Configuration; Step 6: Setup PowerSDR Software

Step 6: Setup the PowerSDR Software
Now that the Delta 44 sound card is completely setup, it is time to setup the PowerSDR
software to use it.
Note that the Delta 44 is supported only in versions Beta 1.3.2 and
later.
Later versions may have these controls in different locations. Click the Setup menu
to pull up the Setup Form and click on the Audio Tab. Select the M-Audio Delta 44 (PCI)
from the Sound Card Selection combobox (see the figure below). Once selected, click the
Apply button and then click OK to close the Setup Form.
Delta 44 Control Panel - Hardware Settings Tab
Page
7
of
10
Products
2/22/2006
file://\\Server\flexradio\Website\WWW\delta44\delta44.htm