users of M-Audio FireWire products to experience such costly problems. Therefore, M-
Audio must require that users of M-Audio FireWire devices refrain from
hotplugging any M-Audio FireWire device. You must make your FireWire connection
while both computer and FireWire device are powered off; then power on.
In case your M-Audio FireWire device was not detected by your computer on startup, try
the following troubleshooting options instead of hotplugging it:
4. Turn your M-Audio FireWire device off, wait 30 seconds then power it on.
5. Put your computer into hibernation mode, wait 30 seconds then reactivate it.
6. Restart the computer (don’t turn it off) while the M-Audio FireWire device remains
connected and powered on.
To Previous Page
Loading...
