EasyManua.ls Logo

M-Audio Firewire Audiophile

M-Audio Firewire Audiophile
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Features and Technical Features
2 x 4 unbalanced analog operation on RCA jacks
Coaxial S/PDIF I/O
Rotary encoder is assignable to control any software-addressable level, e.g., output
DACs, software returns, or hardware input monitor levels
Headphone output with rotary encoder level control
Front panel headphone source switching; can be assigned as a Direct Monitoring
on/off switch
Status indicator LEDs show Headphone Source or ASIO Direct Monitoring state, as
selected in the control panel
Versatile mixer/router control panel provides near zero-latency hardware direct
monitoring
Extremely low-latency hardware/drivers
MIDI I/O
S/PDIF activity indicator LEDs for input and output.
Two 6-pin FireWire ports.
Power on/off switch with indicator LED
Bus-powered or powered via included power supply
Frequency response: 20-40KHz +/- 1dB
SNR and dynamic range (A-weighted): 102dB ADC, 106dB DAC
THD + N: 0.00281% @0dBFS (= -91dB)
Sampling rates – 32k to 96kHz for analog in and out
Sampling rates – 44.1k, 48k, 88.2k, and 96kHz for S/PDIF in and out

Other manuals for M-Audio Firewire Audiophile

Related product manuals