M-Audio M-TRACK 2X2 User Manual

3
User Guide (English)
Introduction
Box Contents
M-Track 2X2
USB-C–to–USB-C Cable
USB-C–to–USB-A Cable
Software Download Cards
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit m-audio.com.
For additional product support, visit m-audio.com/support.
Quick Start
Windows users: Before connecting M-Track 2X2 to your computer, install the drivers:
1. Go to m-audio.com/drivers and download the latest M-Track 2X2 driver for your
operating system.
2. Open the file you downloaded and double-click the driver installer file.
3. Follow the on-screen instructions to install the drivers.
Note:
• Remember to select M-Track 2X2 as your interface in the Preferences, Options, Device
Setup, etc. in your digital audio workstation (DAW).
• Use the +48V (Phantom Power) Switch only if a microphone requires phantom power.
Most dynamic microphones and ribbon microphones do not require phantom power, but
most condenser microphones do. Consult your microphone's documentation to find out
whether it needs phantom power.
Connection Diagram
Items not listed under Introduction > Box Contents are sold separately.
Front Panel
Rear Panel
Monitors
Headphones
Guitar
Computer
Microphone
M-TRACK
2X2
C -SERIES

M-Audio M-TRACK 2X2 Specifications

General

XLR in	Yes
Interface	USB
Sample rate	192 kHz
Audio quality	24 bit
Product color	Black
Compatible operating systems	Windows 7, MAC OS X 10.8

Weight and Dimensions

Weight	907 g
Dimensions (WxDxH)	152 x 71 x 198 mm