EasyManua.ls Logo

M-Audio M-Track Duo - Appendix Information; Technical Specifications

M-Audio M-Track Duo
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Appendix (English)
Technical Specifications
All specifications are measured at 20 kHz bandwidth. Specifications are subject to change without notice.
Mic Input (balanced XLR)
Frequency Response
20 Hz – 20 kHz (+0.1 dB)
Signal-to-Noise Ratio
109 dB (A-weighted)
THD+N
0.003% (min. gain, 0 dBu out, A-weighted)
Preamp EIN
-128 dBu (max. gain, 40 source, A-weighted)
Gain Range
Direct Mono: 0 dB to +54 dB
Direct Stereo: 6 dB to +60 dB
Line Input (balanced 1/4" [6.35 mm] TRS)
Frequency Response
20 Hz – 20 kHz (+0.1 dB)
Sensitivity
-43 dBu
THD
0.002% (min. gain, 0 dBu out, A-weighted)
Gain Range
Direct Mono: -10 dB to +44 dB
Direct Stereo: -4 dB to +50 dB
Instrument Input (unbalanced 1/4" [6.35 mm] TS)
Frequency Response
20 Hz – 20 kHz (+0.1 dB)
THD+N
0.005% (min. gain, 0 dBu out, A-weighted)
Input Impedance
1 M
Gain Range
Direct Mono: -10 dB to +44 dB
Direct Stereo: -4 dB to +50 dB
Main Outputs, L and R (impedance-balanced 1/4" [6.35 mm] TRS)
Frequency Response
20 Hz – 20 kHz (+0.1 dB)
Signal-to-Noise Ratio
109 dB (A-weighted)
THD
0.002% (0 dBu out, A-weighted)
Max Output Level
+4 dBu
Headphone Output (1/4” [6.35 mm] TRS)
Power
60 mW/Ch, 32
Frequency Response
20 Hz – 20 kHz (+0.5 dB)
THD+N
0.02% (A-weighted)
Signal-to-Noise Ratio
100 dB (A-weighted)

Related product manuals