EasyManua.ls Logo

M-Audio Omnistudio USB - 16 Product Specs

M-Audio Omnistudio USB
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recording/Playback Configurations (USB bandwidth limited)
g
16-bit / up to 48 kHz = 4-in, 4-out
g
24-bit / up to 48 kHz = 4-in, 2-out OR 2-in, 4-out
g
24-bit / 88.2 or 96 kHz = 2-in OR 2-out
Performance Specifications
All measured performance specifications were obtained using 24-bit 48kHz settings.
Balanced Direct -10dBV Output:
g
Signal-to-Noise Ratio: 104 dB (no A-weighting), 107 dB (A-weighting)
g
Dynamic Range (-60dBFS): 107 dB (A-weighting)
g
THD+N: -95 dB (no A-weighting)
Balanced Direct +4dBu Output:
g
Signal-to-Noise Ratio: 105 dB (no A-weighting), 108 dB (A-weighting)
g
Dynamic Range (-60dBFS): 109 dB (A-weighting)
g
THD+N: -95 dB (no A-weighting)
Main Output:
g
Signal-to-Noise Ratio: 96 dB (no A-weighting), 99 dB (A-weighting)
g
Dynamic Range (-60dBFS): 100 dB (A-weighting)
g
THD+N: -93 dB (no A-weighting)
Stereo Aux Input:
g
Signal-to-Noise Ratio: 97 dB (no A-weighting), 103 dB (A-weighting)
g
Dynamic Range (-60dBFS): 103 dB (no A-weighting), 123 dB (A-weighting)
g
THD+N: -90 dB (no A-weighting)
Mic Input:
g
Signal-to-Noise Ratio: 96 dB (no A-weighting), 101 dB (A-weighting)
g
Dynamic Range (-60dBFS): 103 dB (no A-weighting), 120 dB (A-weighting)
g
THD+N: -90 dB (no A-weighting)
g
Both channels have Clip (Red, -1dBFS) and Signal Present (Green, -15dBFS) LED
Inst Input:
g
Signal-to-Noise Ratio: 96 dB (no A-weighting), 101 dB (A-weighting)
g
Dynamic Range (-60dBFS): 103 dB (no A-weighting), 122 dB (A-weighting)
g
THD+N: -90 dB (no A-weighting)
Mic Input to Main Output:
g
Signal-to-Noise Ratio: 96 dB (no A-weighting)
g
Dynamic Range (-60dBFS): 97 dB (no A-weighting), 101 dB (A-weighting)
g
THD+N: -95 dB
16. Product Specs
40

Table of Contents

Other manuals for M-Audio Omnistudio USB

Related product manuals