EasyManua.ls Logo

M-Audio Omnistudio USB - Product Features

M-Audio Omnistudio USB
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
g
4-in, 4-out USB audio connectivity
g
High-resolution, high-performance 24-bit/96kHz A/D and D/A converters with a dynamic range of 103dB on input and 109dB on output.
g
Dual low-noise mic/instrument preamps on Channel 1 and 2, featuring hybrid XLR/TRS (1/4”) front panel inputs, switchable 48V phantom
power, individual gain controls, individual -20dB pads, LED metering, and up to 60dB of available gain.
g
Two TRS (1/4”) rear panel inputs for Line level on Channel 3 and 4, with selectable (+4dB / -10dB) input levels.
g
Two rear panel TRS Inserts on Channel 1 and 2.
g
Built-in mixer accepts four audio streams from your computer, four stereo Aux Ins, plus a stereo FX Return for a total of 14 channels.
g
All four Auxiliary Inputs have individual Monitor/Record switches for unequalled routing flexibility
g
Rear panel FX send and returns for connecting to external hardware processors.
g
Zero latency hardware direct monitoring with four individual level controls, enable and stereo/mono switches.
g
Four rear panel balanced TRS Direct Outs with switchable (+4dB / -10dB) output levels.
g
Individual 1/4” TRS balanced Monitor and Main output pairs.
g
Supports sampling rates from 8kHz to 96kHz (higher sampling rates allow fewer output channels).
g
Two headphone outputs with individual level controls
g
1 x 1 MIDI I/O
2. Features
4

Table of Contents

Other manuals for M-Audio Omnistudio USB

Related product manuals